Carriage of Dangerous Goods and Use of Transportable Pressure Equipment (Amendment) (EU Exit) Regulations 2020

At the end of the transition period, the dangerous goods and transportable pressure equipment directives are retained in their entirety in UK law. This draft instrument makes the changes necessary so that the requirements and procedures within those directives continue to function correctly. This is essential to ensure the regulatory regime in place in Great Britain after the transition period continues to function. This instrument updates references and definitions used in the regulations to reflect the UK’s exit from the EU.

At present, the power to issue derogations from ADR and RID, and in respect of inland waterways, rests with the European Commission. This draft instrument gives the Secretary of State power to issue domestic derogations where safety is not compromised. The instrument also introduces a new UK conformity mark—the UK TPE—so that transportable pressure equipment, or TPE, may continue to be manufactured and inspected in Great Britain after the transition period. This instrument places obligations on manufacturers, importers, distributors and owners of this UK TPE, and it mirrors the requirements of the Transportable Pressure Equipment Directive.

This instrument introduces a process by which the competent authority in Great Britain—in practice, the Secretary of State—may appoint bodies to undertake inspections, examinations, testing and approval of transportable pressure equipment. Under the Transportable Pressure Equipment Directive, the European Commission would have been notified of, and could have vetoed, such an appointment before a UK inspection body was awarded “notified body” status. For notified bodies established in Great Britain before the end of the transition period, this instrument provides for their appointment by the GB competent authority without charging a fee.

As the carriage of dangerous goods is devolved to Northern Ireland, this instrument will also ensure that transportable pressure equipment assessed in Northern Ireland in accordance with the transportable pressure equipment directive continues to be recognised in Great Britain, through acceptance of the UK(NI) mark. This implements a requirement of the Northern Ireland protocol relating to unfettered access of goods between Northern Ireland and Great Britain.

This instrument is relatively simple. It serves to ensure the continued effective regulation of the carriage of dangerous goods in Great Britain to the same standards as before the UK’s departure from the EU. It maintains the existing regulatory framework but includes essential amendments to ensure we have a functioning statute book. I beg to move.

I welcome my noble friend’s introduction of this SI and congratulate her on her clear explanations and her words of reassurance that this merely maintains what we have now, but if she could answer the questions I have raised, I would be most grateful.

My other concern is the consultation, which took place two years ago. The list of bodies quoted as consultees does not include any specific reference to the nuclear industry. I hope the Minister can reassure me. I hope she can explain clearly that the SI refers to the nuclear industry—I assume it does—and explain which of the bodies consulted cover the nuclear industry. How were the views of that industry taken into account? For example, nuclear waste from Hinkley Point in Somerset travels regularly by night train to Sizewell. The amount of nuclear waste will increase when Hinkley C is operative, and there will be real challenges in rail capacity and so on, so the issue of safety there is important.

Finally, what if there is no deal? Will this legislation be affected? Will it be affected by the handover process from the current system to any new system?

However, it is worth going into a bit more detail about consultations with the industry—the noble Baroness, Lady Randerson, mentioned the nuclear industry and whether it had been consulted. This SI has been very widely consulted on. We actively engaged with over 300 stakeholders, including the Office of Rail and Road, and no concerns were raised. In 2018, we issued a public consultation on this SI and received just seven responses, none of which raised any concerns but some of which guided our drafting, as noble Lords would expect. Because that was done back in 2018, we conducted a second informal consultation in 2019 which targeted specific stakeholders, primarily around transportable pressure equipment and the conformity assessment bodies, on the introduction of the non-mandatory UK mark. Again, there were few responses—just four—and they did not identify any concerns with our approach to the introduction of this mark and guided our thinking as to how it would be implemented.

The noble Lord, Lord Rosser, mentioned the petroleum driver passport. This will not be impacted at all by the regulations. The PDP is a UK industry scheme which was established with backing from DECC, now BEIS. It was set up and is managed by the industry—the Downstream Oil Distribution Forum. DfT’s role with the PDP is to facilitate the contract for the delivery of the scheme between the DODF and the Scottish Qualifications Authority, which manages the implementation of the scheme. There will be no change: the DODF will retain the ownership and management of the scheme which is not mandated by law. We expect that to continue.

It is worth spending a little time on Northern Ireland and on possible exemptions that may arise. As the transport of dangerous goods is a devolved issue, Northern Ireland has its own legislation concerning this, but it mirrors the GB regulations. At the end of the transition period, Northern Ireland will continue to apply the requirements of one of the directives relating to the transport of dangerous goods—the transportable pressure equipment directive. This means that transportable pressure equipment, or TPE, conformity assessed in Northern Ireland will need to bear the UK(NI) marking in addition to the pi marking required by that directive. This draft SI introduces a provision to recognise such marked transportable pressure equipment on the market in Great Britain. Without this provision, it would not be possible to place such equipment on the market in Great Britain, and therefore it is required to permit unfettered access of such equipment between Northern Ireland and Great Britain.

The noble Lord, Lord Rosser, also asked about the different marks. In Great Britain, at the end of the transition period TPE already on the market with a pi mark will continue to be recognised, and any new TPE entering the market in Great Britain may either be pi marked or rho marked. To that extent, the rho marking is non-mandatory. Where a new product is pi marked, GB inspection bodies will not be able to perform conformity assessments, as they have to be undertaken by EU notified bodies. Northern Ireland is in the process of making equivalent regulations, which will mirror what is under discussion today and which are making their way through its legislative system.

On divergence and exemptions—an important topic—the Government are not actively looking to diverge from, or to create new domestic exemptions from, the present regulations on the carriage of dangerous goods. Of course, we will continue to work both with EU partners and internationally as regulations may be developed, but these tend to be reviewed every two years, and we are not looking actively to diverge from them at all. In considering any such exemptions or divergence from the present regulations, safety of course will always remain a priority. However, it is important that our domestic legislation provides flexibility, which is where we come to the Secretary of State being able to grant exemptions as and when they become necessary, although safety will of course be top of mind. At present, about 20 exemptions are being used by industry. They all expire on 30 June 2021 and therefore may need to be extended, if that extension is still appropriate.

It may help if I give a brief example of what a derogation might look like. Road derogation 17 is a partial exemption because complying with the requirements would be impractical. A health care worker does not need to comply with the ADR requirements if, for example, they carry a two kilogram fire extinguisher when carrying a small amount of clinical waste. I think we can all agree that that makes complete and utter sense, and it is the sort of thing for which derogations are used. A second example is where a very small amount of explosive article is being transported. Usually you would not carry the detonating fuzes alongside that explosive article, but if there are very small quantities of the explosive article, it is of course appropriate, because the safety risk is fairly negligible. A note to Hansard may be of interest to noble Lords: the correct spelling is “fuze”, as that is its proper shipping name. I did not know that.

I hope that I have answered the questions today. The noble Lord, Lord Rosser, at the end of his remarks, asked whether hauliers carrying dangerous goods will be delayed as they arrive at Kent. As long as hauliers and consignors have all the correct documentation required, not only those for dangerous goods purposes but those that are required for all hauliers to get a Kent access permit, we do not envisage that there will be a problem.

This instrument makes very minor changes to the retained EU legislation to ensure that appropriate national arrangements are in place to oversee the safe carriage of dangerous goods. I commend it to the House.