I beg to move, That the Bill be now read a Second time.
This Bill creates a mechanism to boost United Kingdom construction while driving down our greenhouse gas emissions, which is key to delivering UK growth in a manner aligned with the country’s net zero targets. The proposal has come from the industry, which supports the Bill wholeheartedly. The industry is working to reduce these carbon emissions voluntarily, but it needs the Government to take the lead and accelerate the work that it has started.
The Bill tackles an area of greenhouse gases called embodied carbon. Every year, our buildings and construction are responsible for the emission of more than 150 million tonnes of greenhouse gases, fully a quarter of our country’s total carbon footprint. Two thirds of those emissions are due to the lighting of buildings, their power and their water—the heating and cooling—and bear the tag “operational carbon”, and the Government have taken bold steps to reduce them as part of the net zero strategy. The building regulations, under part L, effectively address the reduction of operational carbon. As a direct consequence of the regulations and, importantly, the decarbonisation of the electricity supply, it is anticipated that by 2035 the emissions related to the services side—the operational carbon side—of buildings and construction will have fallen to an almost negligible level.
That is fantastic news, and the Government deserve our praise for gripping the issue and creating a plan, enforcing it through regulation and then implementing it with the very significant reductions in operational carbon that we are already seeing; but what about the other third of building emissions? Where do those remaining emissions come from, and what plan do we have to deal with them?
That other third comes from our use of construction materials: their production, transportation and installation on our construction sites; their maintenance, refurbishment and replacement during a building’s life; and ultimately their demolition and removal at the end of the building’s life. That is 50 million tonnes of carbon emissions each year, which are called embodied carbon. Let me put that amount into perspective: it is greater than the emissions of all the United Kingdom’s aviation and shipping industries combined.
Let us think about how much effort we put into the control and planned reduction of those emissions. We have the sustainable aviation fuels plan, we have jet zero, and we have plans for corridors for emission-free shipping based on ammonia and hydrogen. We take all those plans very seriously, but what are the Government doing, and what are we doing as a nation, to deal with embodied carbon from construction? With 50 million tonnes of embodied carbon emissions a year, we might expect that the Government would already have plans to direct a reduction in line with our legally binding net zero targets.
The truth is that embodied carbon remains completely unregulated, and it shows from the data. Operating carbon emissions are dropping rapidly because of part L and the decarbonisation of our electricity supply, but the data on embodied carbon shows no current trend towards any reduction at all. In 1995, there were 43 million tonnes of greenhouse gas-equivalent emissions; by 2018, emission levels, far from reducing, had crept up to 49 million tonnes and were approaching 50 million.
The Environmental Audit Committee, on which I sit, reported on the issue in May. Its report, which I commend to the House, concludes that
“the single most significant policy the Government could introduce is a mandatory requirement”
to assess embodied carbon in buildings. Not only do we not regulate the reduction of embodied carbon, but we currently have no idea how much a construction or design will emit, because we do not require business constructors to calculate that amount.
To be fair to the Government, their net zero strategy sets out an intention to
“support action in the construction sector by improving reporting on embodied carbon in buildings and infrastructure with a view to exploring a maximum level for new builds in the future.”
In a similar vein, the Government’s construction playbook calls for carbon assessments on all public projects. However, it provides no details as to how that should take place or what an appropriate carbon emissions level is. With every school, hospital and road we build, a different approach is therefore taken to calculating overall carbon. That is hopelessly inefficient for the industry, and it costs the taxpayer more.
As is so often the case, the real world is moving at a faster pace than the Government. Major design firms that employ tens of thousands of staff are making voluntary commitments to calculate the carbon emissions due to their designs. Construction industry bodies such as the Royal Institute of British Architects have set out voluntary embodied carbon emissions targets. The Royal Institution of Chartered Surveyors has defined a methodology for calculating embodied carbon, but its ambition is hampered by a lack of regulation.
Voluntary industry targets remain just that. Every project that businesses work on has different reporting requirements and different carbon targets, costing them time and money. Regulation is needed to speed up the processes by identifying an agreed methodology and spreading acceptable practice throughout the sector, not just among the market leaders but in the long tail that any sector has, to bring everyone up to a minimum level of best practice.
Today, nearly 200 of the country’s leading developers, clients, contractors, architects, engineers and institutions have written statements of support calling for the regulation of embodied carbon. The Royal Institute of British Architects calls on the Government
“to introduce regulations that stipulate consistent assessment and reporting of whole life carbon, including setting specific targets for embodied carbon.”
NatWest, one of the leading investors in the sector, highlights the role of regulation as
“one of the key mechanisms that drive sustainable behaviour and action amongst investors, tenants, developers and home owners.”
The UK’s largest active asset manager, abrdn—it is spelled rather strangely—believes that
“the requirements to report whole life carbon, and set informed limits on embodied carbon, would help the real estate sector to decarbonise.”
Barratt Developments, one of the big four providers of homes in the residential sector, says:
“We have been calculating the embodied carbon of our homes for over ten years now…We are also developing requirements for our supply chains to support this process”.
Similar sentiments come from corporate leaders such as Landsec, British Land, Lendlease, Willmott Dixon, Sir Robert McAlpine, Laing O’Rourke, Morgan Sindall and ISG—I could go on. Industry bodies, such as the Construction Industry Council, the Chartered Institute of Building, Timber Development UK, importantly, the Concrete Centre, and, equally importantly, the Steel Construction Institute, also support that approach. Industry already has the tools necessary to respond to the Bill; regulation would simply unlock the final door to enable existing mechanisms to run smoothly.
What are other countries in Europe doing? France, Sweden and the Netherlands already have embodied carbon regulation in force, and the Netherlands, the market leader, has had its in force since 2012. Finland, Denmark and Norway are in the process of introducing it, and the European Commission is considering proposals to roll it out across the whole of the EU. So, why are we not?
Despite the Government recognising that they need to act, and despite the industry agreeing and setting out a widely supported solution, the Government seem to be beset by hesitation. Their response to the Environmental Audit Committee stated that they intend to consult, and undertake “parallel stakeholder engagement”, some time in 2023, on what its approach to embodied carbon should be. That was to a report published in May 2022. When the cost of inaction is 50 million tonnes of carbon emissions per year, where is the dynamism of Government? Where is their sense of urgency?
My Bill would enable the Government to catch up on the issue, directly amending the building regulations. It will require the reporting of carbon on significant building work, both new projects and refurbishments, from 2023 in the large-building, non-domestic sector, and by 2025 for housing in developments of more than 10 dwellings. It will then move to introduce limits on the embodied carbon emitted through construction from 2027—something that can be ratcheted down over time, in line with our net zero targets.
That strategy, of “report first, limit later”, follows the precedents set elsewhere in Europe, and makes the transition towards zero-carbon construction easier while sending a clear signal that legislated limits are coming. Similarly, to assist small and medium-sized enterprises, the Bill introduces those requirements only for major projects—those greater than 1,000 square metres of useful internal area or responsible for the construction of 10 new dwellings.
A clear policy signal on the direction of travel is what the industry needs to accelerate its development and the large-scale use, and more efficient use, of lower-carbon products. Just as how the policy statement that vehicles will not be sold with an internal combustion engine post 2030 has transformed the car manufacturing market, the construction industry needs that kind of market signal to invest in lower-carbon alternatives and take the next step to the wider adoption of what are currently niche products. By sending a clear policy signal from Government to industry, we will enable the sector to grow ahead of time. We must signal the road map to the end of high-carbon construction in the United Kingdom to enable the building industry to take the needed steps towards zero-emission construction.
Is it really too soon to move, as the Government suggest? In their response to the EAC report, the Government identified three workstreams before they want to take a decision. First, they want to continue understanding the actions that industry is already taking and the impact. Secondly, they are watching the outcomes of the Greater London Authority’s planning policy requirement “with interest” and, thirdly, they are
“looking at international policy examples.”
I have already demonstrated that my Bill is the outcome of industry consensus and that it follows the “report first, limit later” approach adopted internationally. So the only additional consideration is an assessment of the use of the planning policy by the Greater London Authority in its London plan to require measurement of embodied carbon as part of the planning process, yet even here there is a consensus that regulation via the building regulations is the right approach.
During the Environmental Audit Committee evidence session, the principal strategic planner for the GLA’s London plan was asked in terms what role building regulations could play. Her answer was explicit. She said:
“We would agree…it is something that the Government should regulate. We think it should be part of building regulations”.
Even the GLA, whose planning policy approach the Government apparently see as a potential alternative to the use of building regulations, agrees that building regulations are the right way to go. There are of course very sound practical reasons for that. Detailed decisions on materials will not have been made at the date of a planning application, so only vague guestimates of carbon intensity and emissions could be used at that stage. It is at the point of construction that meaningful figures can be generated, which is where planning control comes in. In any event, we do not expect planning officers to assess the properties of, for example, rooftop insulation as part of a planning application. That kind of technical assessment is the job of building control and the same applies in respect of embodied carbon.
When the Government say that they want to consult on their approach on measurement and reduction of embodied carbon, we may be beginning to wonder who else is there that they are intending to consult. The sooner we start this process, the sooner we can reduce our emission of 50 million tonnes of carbon every year. My Bill will reduce the construction industry’s carbon footprint, while sending certainty to UK industry that investing in decarbonisation is economically sound. It will bring economic growth and it will save the taxpayer money by standardising the decarbonisation process. The Government have great ambition to decarbonise. We all support it, and they should be commended for their ambition and for the many actions they have already taken in this field. The construction industry has the appetite, tools and skills to match that ambition. We have here a tremendous opportunity to make a significant impact on the UK’s carbon emissions and ensure that the UK remains a global leader by regulating embodied carbon in construction. I commend this Bill to the House.